Table of Contents
Advertisement
The following table describes the interfaces and the buttons.
Interface
DSL
Phone1/2
LAN 4~1
WAN
Reset
USB1/2
Power
On/Off
WiFi
WPS
RJ-11 port. Connect the router to DSL
connector or splitter through telephone cable.
RJ-11 port, using the telephone cable to
connect the telephone set.
RJ-45 port, for connecting the router to a PC or
another network device.
For connecting Ethernet cable to provide
Ethernet uplink.
Press the button for at least 1 second and then
release it. System restores the factory default
settings.
USB port, for connecting the 3G network card
or other USB storage devices.
Power interface, for connecting the power
adapter.
Power switch.
WiFi switch, for enabling or disabling the WiFi
function.
This button is used for enabling WPS PBC
mode. If WPS is enabled, press this button, and
then the wireless router starts to accept the
negotiation of PBC mode.
Description
Advertisement
Table of Contents
