WPA Group Rekey Interval: specifies the timer the
–
WPA key must change. If the value is set to 0, there
is no need to change. The change is done
automatically between the server and the client.
WPA Encryption: select TKIP, AES or TKIP + AES.
–
The AES is default. The TKIP + AES encryption
mode means AP auto adjust to use TKIP or AES
according to wireless clients.
Click Save/Apply to save the wireless security options and
make the changes take effect.
Figure 141 Wireless-security (WPA2-PSK authentication)
Mixed
authentication mode means AP auto adjust to use
WPA2-PSK or WPA-PSK according to wireless clients.
Network Authentication: Set the authentication
–
mode for the selected wireless LAN of SSID to Mixed
WPA2/WPA-PSK.
WPA Pre-Shared Key: Enter the pre-shared key for
–
WPA. Client stations must use the same key in order
to connect with this device. Check the table below for
instructions when entering the key.
Format
WPA2/WPA-PSK
Minimum
characters
Authentication:
Maximum Characters
170
This