Ovislink OV804WV User Manual page 129

Figure 110 QoS classification configuration

Traffic Class Name: Enter a name of the class.

Rule Order: Select order for queue.

Rule Status: Enable or disable this traffic class rule.

Assign Classification Queue: Select a classification
queue.

Assign Differentiated Service Code Point (DSCP) Mark:
Select a mark service that modifies the original packet IP
header if all rules defined within the classification class are
matched.
Forwarding, EF-Expedited Forwarding)

Mark 802.1p if 802.1q is enabled: Select an 802.1p priority
number that serves as the 802.1p value.
There are two sets of classification rules. Set-1 is based on
different fields within TCP/UDP/IP layer plus physical LAN port;
Set-2 is based on MAC layer IEEE 802.1p priority field.
Set-1 Rules contain the following:
(CS-Mark IP
125
Precedence, AF-Assured