Ovislink OV804WV User Manual page 163

interface, hide the network from active scans, set the wireless
network name (also known as SSID) and restrict the channel
set based on country requirements.
Following is a description of the different options:

Enable Wireless: if you want to make wireless be
available, you have to check this box first. Otherwise, the
Hide Access Point SSID, Country, Enable Wireless Guest
Network, and Guest SSID boxes are not displayed.

Hide Access Point: select this check box if you want to
hide any access point for your router, so a station cannot
obtain the SSID through passive scanning.

Clients Isolation: when many clients connect to the same
access point, they can access each other. If you want to
disable the access between clients which connect the
same access point, you can check this box.

Disable WMM Advertise: WMM is short for Wi-Fi
multimedia,
multimedia voice and video data transfers.

SSID: the SSID is the network name shared among all
points in a wireless network. The SSID must be identical
for all points in the wireless network. It is case-sensitive
and must not exceed 32 characters (use any of the
characters on the keyboard). Make sure this setting is the
same for all points in your wireless network. For added
security, you should change the default SSID to a unique
name.

Country: the name of the country with which your
gateway is configured. This parameter further specifies
your wireless connection. For example, The channel
adjusts according to nations to adapt to each nation's
frequency provision.

Max Clients: it specifies maximum wireless client stations
to be enble to link with AP. Once the clients exceed the
max vlaue, other clients are refused. The value range is
between six and ten.

Wireless-Guest/Virtual Access Points: if you want to
which can
159
provide high-performance