Deselecting the Enable virtual ports check box disables the
system capability to recognize individual Ethernet port within
the Ethernet switch. The Web UI displays two Ethernet ports,
ENET (1-3) and ENET4. The ENET (1-3) represents the
Ethernet MAC MII port. The ENET4 represents the BCM634x
Ethernet MAC/PHY MDI port.
4.4.8.1 Create a Mapping Group
Group Name: enter a unique group name.
Grouped Interfaces: the port belongs to this group.
Available Interfaces: it shows the available Ethernet port
which you can select.
Automatically Add Clients With the following DHCP Vendor
IDs: if a vendor ID is configured for a specific client device,
reboot the client device attached to the DSL Router to allow it
to obtain an appropriate IP address. (For example, the
windows 2000/XP default DHCP client's vender ID is MSFT
5.0.).
137