Ovislink OV804WV User Manual page 105

Step 2 Select the required application from the Select an
application drop-down list, or manually enter the
information in the Custom application field.

Trigger Port Start and Trigger Port End: enter the port
that is to be monitored for outgoing data traffic.

Trigger Protocol: select the protocol that is to be
monitored for outgoing data traffic.

Open Protocol: select the protocol that is to be allowed
for incoming data traffic

Open Port Start and Open Port End: enter the port that
is to be opened for incoming traffic.
Step 3 Click Save/Apply to apply the settings.
Removing Port Triggering
Step 1 Select the Remove check box.
Step 2 Click Save/Apply to apply the settings.
Figure 79 Port triggering
101