Advanced Devices; Data Registers - Mitsubishi FX2N-32DP-IF User Manual

FX2N-32DP-IF Profibus-DP Interface Unit
5.

Advanced Devices

5.1

Data Registers

Table 5.1: Supported Data Register List
Items
D0 ~ D99
D100 ~ D199
D200 ~ D299
*1 If the 32DP-IF is in data exchange mode, the sent data to a DP-master can be monitored
by reading data registers D0 ~ D99 in the programming tool.
For example of allocating device, refer to section 5.1.1.
*2 If the 32DP-IF is in data exchange mode, the received data from a DP-master can be
monitored by reading data registers D100 ~ D199 in the programming tool.
For example of allocating device, refer to section 5.1.1.
*3 The data registers D200 ~ D299 contain the user parameter data which sent by the
DP-master. After power on, when the 32DP-IF is in the search baud rate state or the wait
parameter state, these data register contain the default parameter data.
For user parameter, refer to chapter 7.
Input (sent) data to DP-master
Output (received) data from DP-master
*3
Parameter data
Description
*1
*2
Advanced Devices 5
5-1