Table of Contents
Advertisement
FX2N-32DP-IF Profibus-DP Interface Unit
4.2
Power Supply Specifications
Table 4.2: Power Supply Specifications
Item
Power Supply
Max. Allowable Momentary
Power Failure Period
Fuse (size) Rating
In-rush Current
Power Consumption
24 V DC Service Supply
Max. 5 V DC Bus Supply
4.3
Performance Specifications
Table 4.3: Performance Specifications
Maximum Number of Controllable
I/O Points
Transmission data
(Maximum exchanged data length)
Transmission Type
Connector
Supported Baud
Rates (bps) and
Bus Length
LED Indicators
(AC Power Supply Type)
100 ~ 240 V AC +10% -15%,
50/60 Hz
10 ms at 100 V AC
(< 10 ms, 32DP-IF = RUN continue,
> 10 ms, 32DP-IF = power down)
3 A
<φ 5 × 20 mm (0.2 × 0.79 inches),
Time lag fuse>
100 V AC Max. 40 A < 5 ms,
200 V AC Max. 60 A < 5 ms
30 VA
500 mA
220 mA
Items
Maximum 256 points (see section 1.3)
Max.200 bytes, total of sent and received during one bus cycle.
(input: Max. 200 bytes, output: Max. 200 bytes)
Bus network
9 pin D-SUB
Connector for Profibus-DP network
Connector for FX-20P-E or personal computer (MELSEC
8 pin mini DIN
MEDOC PLUS)
9.6k, 19.2k,
1,200 m (3,937')
45.45k, 93.75k
187.5k
1,000 m (3,281')
500k
400 m (1,312')
1.5M
200 m (656')
3M, 6M, 12M
100 m (328')
POWER LED
ON when AC power is supplied.
ON when 32DP-IF is exchanging data with extension I/O blocks/
RUN LED
units and special function blocks.
BF LED
ON when a communication error is detected. (No data exchange)
DIA LED
ON when notice of diagnostic data is detected.
Description
FX
-32DP-IF
2N
Specifications
Specifications 4
FX
-32DP-IF-D
2N
(DC Power Supply Type)
24 V DC +20% -30%
5 ms at 24 V DC
(< 5 ms, 32DP-IF = RUN continue,
> 5 ms, 32DP-IF = power down)
1 A
<φ 5 × 20 mm (0.2 × 0.79 inches),
Time lag fuse>
24V DC Max. 30mA < 5ms
14W
-
4-2
Advertisement
Table of Contents
