Mitsubishi FX2N-32DP-IF User Manual page 20

FX2N-32DP-IF Profibus-DP Interface Unit
Table 1.4: 24V and 5V DC Supply Capacity
FX -32DP-IF
2N
FX -32DP-IF-D
2N
FX -32ER-ES/UL, FX
2N
FX -48ER-ES/UL, FX
2N
FX -48ER-UA1/UL
2N
FX -48ER-DS, FX
2N
*1 When using the FX
blocks is limited to the values listed in Table 1.5 below.
Table 1.5: Limited Internal 24V DC Supply for FX
FX -32DP-IF
2N
FX -32DP-IF-D
2N
FX -32E*-E**/UL
2N
FX -48E*-*****
2N
*2 The 24V DC power supply capacity for the FX
DC power source because it does not have a 24V DC service power supply.
*3 Use the same configuration rules for the FX
48ET-DSS as applies to the FX
3) Total exchange data length ≤ 200 bytes
(or DP master's maximum exchange data length if ≤ 200 bytes)
The following (a, b) exchange data must be a total of 200 bytes (or DP master's maximum
exchange data length if ≤ 200 bytes) or less.
For DP-master's maximum exchange data length, please see manual of DP-master.
a) Total exchange data for extension I/O units/blocks.
For exchange data for each extension I/O unit/block, refer to Table 1.9.
b) Total exchange data for special function units/blocks.
For exchange data for each special function unit/block, refer to Table 1.9.
Model
-32ET-ESS/UL
2N
-48ET-ESS/UL
2N
-48ET-DSS
2N
-3A, FX
0N
Limited Internal 24V DC Supply for
Model
FX -3A, FX
0N
Max. 5V DC Bus
Supply (mA)
220
220
690
690
690
690
-2AD or FX -2DA, total internal 24V DC supply for those
2N 2N
-2AD and FX
2N 2N
300
190
190
300
-32DP-IF-D is used for only internal 24V
2N
-48ER-UA1/UL, FX
2N
-48ER-ES/UL.
2N
Power Supply
Total 24V DC Service Supply
and Internal 24V DC Supply
(mA)
500
300
250
460
0
0
-3A, FX -2AD and FX
0N 2N
-2DA (mA)
-48ER-DS and FX
2N
Introduction 1
*1
*2
*3
*3
-2DA
2N
-
2N
1-8