Table of Contents
Advertisement
FX2N-32DP-IF Profibus-DP Interface Unit
C-2-27: FX
-2LC (Motorola Format)
2N
Requirements:
• Cyclic data is 3 word inputs and 3 word outputs in every cycle. This data is used for
"Simple Communication 3W-IF". Further information for the simple commnunication 3W-
IF can be found in section 7.2.1 and 7.2.2.
Table C-53: Cyclic Data of FX
1st
2nd
3rd
• Parameter is 70 bytes.
Table C-54: FX
Nr.
Parameter Name
00
clear error register
(1st)
01
Input Type channel
(2nd)
1 (BFM #70)
02
Input Type channel
(3rd)
2 (BFM #71)
03
(4th)
Set Alarm 1 mode
04
(5th)
Set Alarm 2 mode
05
Set Alarm 3 mode
(6th)
Set Alarm 4 mode
06
(7th)
07
ALARM1 value for
(8th)
channel 1.
Send Data
FROM address
TO data
TO address
-2LC (Motorola Format)
2N
Value Setting List
perform nothing
reset error register
Default: 2
Default: 2
alarm function OFF
upper limit input value alarm
lower limit input value alarm
upper limit deviation alarm
lower limit deviation alarm
upper/lower limit deviation
range alarm
up. limit in.value alarm + wait
lo. limit in.value alarm + wait
up. limit deviation alarm + wait
lo. limit deviation alarm + wait
upper/lower lim. dev.+ wait
up. limit dev. alarm + re-wait
lo. limit dev. alarm + re-wait
upper/lower lim. dev.+ re-wait
Default: 0
-2LC (Intel Format)
2N
FROM data
TO data (read back)
TO address (read back)
Receive Data
Description
Select error reset command from
the available options. (BFM #10).
Set input type for channel 1.
(BFM #70)
Setting range: 0 to 42
Select input type for channel 2.
(BFM #71)
Setting range: 0 to 42
•
Select mode of Alarm 1 from the
available options. (BFM #72)
•
Select mode of Alarm 2 from the
available options. (BFM #73)
•
Select mode of Alarm 3 from the
available options. (BFM #74)
•
Select mode of Alarm 4 from the
available options. (BFM #75)
Set channel 1's value for Alarm 1.
(BFM #13)
Setting range: -32768 to 32767
C-56
Appendix C:
Advertisement
Table of Contents
