Table of Contents
Advertisement
FX2N-32DP-IF Profibus-DP Interface Unit
Note:
*1 These extension I/O units can connect to FX
They cannot connect to FX
*2 This extension I/O unit can connect to FX
It cannot connect to FX
*3 These extension I/O units can connect to FX
They cannot connect to FX
*4 When connecting FX
"*1" module), those extension input blocks should be supplied from the FX
extension I/O unit (marked "*1" module).
However, when connecting FX
type (marked "*3" module), those extension input blocks should be supplied from same
external DC power source as the FX
module).
*5 FX
-8ER has 4 DC inputs and 4 Relay outputs. However, this block is counted 8 inputs
0N
and 8 outputs when counting total I/O points.
*6 This value = 8 + 8
*7 FX
-10PG's power consumption for the following terminals is shown below.
2N
Table 1.8: FX2N-10PG's Power Consumption from Extension Power Supply
Terminals
START
X0, X1
VIN
*8 An external 24 V DC power supply is not necessary. However, the external power
consumption is 70mA from the AS-interface power supply.
2N
-32DP-IF (DC power supply type).
2N
2N
-32DP-IF or extension I/O unit of AC power supply type (marked
2N
×
(number of active slave)
≤ 32 mA / 24V DC
DOG
≤ 20 mA / 3 to 5V DC
PG0
≤ 100 mA
5V DC
24V DC ≤ 70 mA
-32DP-IF (AC power supply type).
2N
-32DP-IF-D (DC power supply type).
-32DP-IF-D (DC power supply type).
2N
-32DP-IF-D (DC power supply type).
2N
-32DP-IF (AC power supply type).
-32DP-IF-D or extension I/O unit of DC power supply
2N
-32DP-IF-D or extension I/O unit (marked "*3"
2N
Power Consumption
Introduction 1
-32DP-IF or
2N
1-11
Advertisement
Table of Contents
