Registering an Fcode Box
Registering a Confidential Box
Registering a Bulletin Board Box
To perform Fcode communication, register an Fcode box. There are two types of Fcode
boxes: Fcode confidential boxes and Fcode bulletin board boxes. Be sure to register a sub
address and a PIN number (Fcode confidential communication only) for each Fcode box.
Registering a Confidential Box
You can register a confidential box to the machine, allowing you to receive a fax data that
you do not want to expose to third persons with Fcode communication.
1.
Press [Device Settings] on the touch panel.
2.
Press
or
3.
Enter the administrator name and password and press [OK].
The factory default administrator name and password are "admin" and "aaaaaa"
respectively.
4.
Press [Fax Setup].
5.
Press [Fcode Box].
6.
Press [Register] of a box number.
Memo
To edit a registered Fcode confidential box, enter the PIN number, and then select [Edit].
7.
Press [Confidential Box].
8.
Press the registration button of [Box Name].
9.
Enter a box name.
several times and press [Admin Setup].
552