Table of Contents
Advertisement
The threshold value determines whether or not to print part of the received image on the
next page.
1.
Press [Device Settings] on the touch panel.
2.
Press
or
3.
Enter the administrator name and password and press [OK].
The factory default administrator name and password are "admin" and "aaaaaa"
respectively.
4.
Press [Fax Setup].
5.
Press [Other Settings].
6.
Press
or
7.
Enter a value between 0 and 100 (mm) (0.0 to 3.9 inches), and
then press [OK].
8.
Press [Back] until the home screen is displayed.
Memo
If the excess is larger than the specified reduction threshold value, the excess is printed on
the next page.
If the excess is smaller than the specified reduction threshold value, the received image is
reduced and printed on the next page.
If [Rx Reduc. Rate] is set to [100%] and the excess from the paper size is smaller than the
specified threshold value, the excess is discarded.
several times and press [Admin Setup].
several times and press [Reduc. Margin].
535
Advertisement
Table of Contents
