Setting to Use Network TWAIN
Enable the Network TWAIN function so that you can use the Scan to Computer function on a
computer that is connected via a network.
1.
Press [Device Settings] on the touch panel.
2.
Press
or
3.
Enter the administrator name and password and press [OK].
The factory default administrator name and password are "admin" and "aaaaaa"
respectively.
4.
Press [Scanner Setup].
5.
Press [TWAIN Setup].
6.
Make sure that [Network TWAIN] is set to [ON].
Memo
Pressing [Network TWAIN] switches between [ON] and [OFF].
7.
Press [Back] until the home screen is displayed.
several times, and press [Admin Setup].
216