Oki MC853 User Manual page 561

Receiving a Document That is Saved in a Destination
Bulletin Board Box by Fax (Fcode Polling)
You can perform Fcode polling communication (Fcode polling) by entering the sub address of
an Fcode bulletin board box that is registered to the sender's machine. With this function,
the sender's machine sends a fax in response to instructions from your machine.
Note
If a password is set to a bulletin board box of the sender's machine, your machine cannot
receive a fax.
1.
Press [Fax/Internet Fax] or the
2.
Press [Fax].
3.
Press [Communicating Function] on the [Advanced] tab.
4.
Press [Fcode Polling].
5.
Enter the sub address of the bulletin board box that is registered to
the sender's machine.
The sub address is up to 20 characters in length.
6.
Press [OK].
7.
Press [Back].
8.
Add a destination on the [Fax] tab.
Specifying a Destination (Direct Entry)
Specifying a Destination (Phone Book)
Specifying a Destination (One-touch Button)
Specifying a Destination (Transmission History and Reception History)
9.
Press (START) button.
Memo
Documents that are received with Fcode polling are automatically printed.
(FAX) button.
560