Problems On Document And Paper - Oki MC853 User Manual

Problems on Document and Paper

Memo
If you cannot solve a problem with the following solutions, contact your dealer.
Symptom
The document is The document jammed.
not ejected
from the
machine.
The document The document is not
often jams.
The document guides are
There is a piece of paper
The document feed roller
The machine is inclined.
Paper often
jams.
Multiple The paper is too light or
sheets of
paper are
pulled in at
The paper is damp or has
the same
time.
Paper is pulled
The paper is wrinkled,
in at an
angle.
The back side of the
The edges of the paper
There is only one sheet of
You added new paper
Paper is loaded at an
Cause
appropriate.
not aligned.
inside the ADF.
of the ADF is dirty.
too heavy.
a static charge.
folded, or curled.
paper is printed.
are not aligned.
paper in the tray.
onto the paper that is
already loaded in the
tray.
Solution
Remove the jammed document,
and then set it again.
Use an appropriate document.
Adjust the document guides to
the document.
Open the ADF cover to check.
Clean the document feed roller of
the ADF.
Place the machine on a flat
surface.
The paper is too light or too
heavy. Use the appropriate
paper for the machine.
Use paper stored under proper
temperature and humidity
conditions.
Use the appropriate paper for the
machine. Fix the curled paper.
The paper that has been printed
once cannot be used in Tray 1
and Tray 2/3/4.
Load the paper in the MP tray for
printing.
Fan a stack of the paper well, and
then align the edges of the
paper.
Load multiple sheets of paper.
Remove the already loaded
paper, stack up it onto the new
paper, and then align the edges
of all the paper.
For Tray 1 and Tray 2/3/4, adjust
796
Reference
Setting a
Document
Setting a
Document
Setting a
Document
If a
Document
Jam Occurs
Cleaning the
Document
Feed Rollers
and
Document
Holding
Rollers
-
Loading
Paper
Loading
Paper
Loading
Paper
-
Loading
Paper
-
Loading
Paper
Loading