Registering an Fcode Box
• Registering a Confidential Box
• Registering a Bulletin Board Box
To perform Fcode communication, register an Fcode box. There are two types of Fcode
boxes: Fcode confidential boxes and Fcode bulletin board boxes. Be sure to register a sub
address and a PIN number (Fcode confidential communication only) for each Fcode box.
Registering a Confidential Box
You can register a confidential box to the machine, allowing you to receive a fax data that you
do not want to expose to third persons with Fcode communication.
1
Press [Device Settings] on the touch panel.
2
Press
or
several times and press [Admin Setup].
3
Enter the administrator name and password and press [OK].
The factory default administrator name and password are "admin" and "999999"
respectively.
4
Press [Fax Setup].
5
Press [Fcode Box].
6
Press [Register] of a box number.
To edit a registered Fcode confidential box, enter the PIN number, and then select [Edit].
7
Press [Confidential Box].
8
Press the registration button of [Box Name].
9
Enter a box name.
You can enter up to 16 characters.
10
Press [OK].
11
Press the registration button of [Sub-Address].
12
Enter a sub address.
- 222 -
5. Fax