Saving Scanned Data in USB Memory
To save scanned data to USB Memory, follow the procedure below.
1.
Press [Scan] or the
2.
Set a document in the ADF or on the document glass.
3.
Insert USB Memory into the USB port.
Note
Insert USB Memory straight into the USB port. Inserting USB Memory at a wrong angle
may damage the USB port.
4.
Press [Scan To USB Memory].
5.
Set scan settings if necessary.
Memo
Press [Preview] on the [Advanced] tab to preview the scanned image.
6.
Press the
7.
When a message is displayed to inform you that you can remove
USB Memory from the port, remove it.
(SCAN) button.
(START) button.
230