Table of Contents
Advertisement
2.
Set a document in the ADF or on the document glass.
3.
Press one of the remote scan button corresponding to the scanning
software to turn the machine into the standby mode for the
remote scan.
Memo
To display the remote scan buttons, you must set [PC Scan Mode] to [Secure Scan Mode]
on the touch panel.
4.
Press [From Network] or [From USB Interface] in accordance with
the connection method of the machine and computer.
5.
For the network connection, select a computer to be connected,
and then press [OK].
Memo
If the targeted computer is not displayed, register the computer to the machine.
Registering a Computer That is Connected
6.
Start a scan program on a computer.
7.
Start scanning from the program.
Using ActKey (Windows)
Using the TWAIN Driver (Windows)
Using the WIA Driver (Windows Only)
Using Image Capture (Mac OS X)
258
Advertisement
Table of Contents
