Table of Contents
Advertisement
You can enter up to 32 characters.
8.
Enter the password again, and then press [OK].
9.
To set a permission password, press [Enable] or [Apply Default
Password].
10.
Enter a password, and then press [OK].
A permission password cannot be the same as a document open password. You can
enter up to 32 characters.
11.
Enter the password again, and then press [OK].
12.
Select a permission to print, and then press [Next].
13.
Select a permission to extract, and then press [Next].
14.
Select a permission to edit, and then press [Next].
15.
Check the security setting, and then press [Yes].
16.
Change other settings if necessary, and then press the
button.
194
(START)
Advertisement
Table of Contents
