Pcl Setup; Ps Setup - Oki MC853 User Manual

Error OFF
Report

PCL Setup

Item
Font Source Resident
Font No. I0
Font Pitch 10.00 CPI
Font Height 12.00 point(s)
Symbol Set PC-8
A4 Print Width 78 Column
White Page Skip OFF
CR Function CR
LF Function LF
Print Margin Normal
True Black OFF
Pen Width Adjust ON
Tray Tray 1 1
ID#
Tray 2 5
(Optional)
Tray 3 20
(Optional)
Tray 4 21
(Optional)
MP Tray 4

PS Setup

Item Factory default
L1 Tray Type 1
Network PS- RAW
Sets whether to print error details if PostScript errors occur.
Factory
default
setting
Selects the location of the font to use.
Selects the font number to use.
Available range: I0 to I90 if [Resident] is set/C1 to C4 if
[Resident 2] is set.
Sets the width of the PCL default font.
Available range: 0.44 to 99.99 CPI. (0.01CPI increments)
Sets the height of the PCL default font.
Available range: 4.00 to 999.75 point. (0.25 point
increments)
Selects a PCL symbol set.
Sets the number of digits for automatic line feed on A4
paper.
Selects whether to print blank pages.
Sets the machine operation when receiving CR code.
Sets the machine operation when receiving LF code.
Sets the nonprintable area of the page.
Selects whether to print black image data using mixed CMYK
or print using black toner only.
Sets whether to emphasize thin lines so that the lines look
thicker.
Sets a value that specifies a tray with the PCL paper source
specification command.
Available range: 1 to 59
setting
Set the paper tray number for the Level 1 operator.
[Type 1]: The effective number for paper tray starts from
1.
[Type 2]: The effective number for paper tray starts from
0.
Specifies PS communication protocol mode of data from
Description
Description
991