Setting The Reception Mode; Fax Ready Mode; When Receiving Calls And Faxes (Tel/Fax Ready Mode) - Oki MC853 User Manual

Setting the Reception Mode

Fax Ready Mode

When Receiving Calls and Faxes (Tel/Fax Ready Mode)

When Connecting an Answering Machine (Ans/Fax Ready Mode)
When Using as a Telephone Normally (Tel Ready Mode)
When Using the DRD Function (DRD)
There are five fax reception modes: [Fax Ready Mode], [Tel/Fax Ready Mode], [Ans/Fax
Ready Mode], [Tel Ready Mode], and [DRD]. The reception operation varies depending on
the reception mode. When you change the fax reception mode, check the reception
behavior. In reception mode other than [Fax Ready Mode], you must connect a telephone
to the machine. A telephone that is connected to the machine is called an external
telephone.
When a fax reception is in progress, the sender's information is displayed on the display
screen. Even if the reception is complete, the [DATA IN MEMORY] indicator lights as long as
the data is saved in the Memory of this machine.
Memo
Change the reception mode in [Admin Setup] > [User Install].
User Install
If Memory overflow occurs during data reception, the reception is canceled. In such a case,
ask the sender to send the fax again.
Fax Ready Mode
This mode is the factory default setting. If [Fax Ready Mode] is set, the machine
automatically receives faxes.
If you use the machine only for faxes, this mode is recommended.
When Receiving Calls and Faxes (Tel/Fax Ready Mode)
If [Tel/Fax Ready Mode] is set, the machine automatically determines whether an incoming
call is a voice call or fax, allowing you to use a telephone and fax. To receive calls, you
must connect an external telephone to the machine in advance.
Receiving a Fax
Fax reception automatically starts.
Receiving a Call
528