Table of Contents
Advertisement
Using Network Configuration (Windows Only)
About Network Configuration
Registering the Machine (New Machine) to Network Configuration
Setting Scan To Computer
Changing the Setting Information of the Registered Machine
Deleting Computer Information Registered in the Machine
About Network Configuration
Network Configuration is a tool to set in advance when performing Scan To Computer. Also,
if information, such as the IP address of the machine or computer, is changed when
performing a network scan, you can change the setting values with this tool.
When you install ActKey, Network Configuration is also installed at the same time.
When you start a computer, Network Configuration is automatically included in the task bar.
Registering the Machine (New Machine) to Network
Configuration
1.
Click [Start], and then select [All Programs] > [Okidata] >
[ActKey] > [Tools] > [Network Configuration].
2.
Right-click [Show Network Configuration] in the task tray.
3.
Select a scanner driver to use, and then select [Add Scanner] from
the [Scanner] menu.
4.
Select the scanner driver name to be added.
266
Advertisement
Table of Contents
