Oki MC853 User Manual page 798

angle.
Envelopes are loaded in
the wrong direction.
Paper, envelopes, or
labels whose weight is
221 to 256 g/m
95 lb) is loaded in Tray 1
and Tray 2/3/4.
The rear output tray is
not closed firmly.
Paper is not fed. The [Paper Feeding
Source] setting on the
printer driver is specified
incorrectly.
The manual feeding is
specified on the printer
driver.
Paper is not fed Tray 2/3/4 is not set with
from Tray 2/3/4 the printer driver.
(optional).
Even after the -
jammed paper
was removed,
the machine
does not work.
Paper is curled. The paper is damp or has
Paper is a static charge.
creased.
The paper is light.
The paper twists The settings of media
around the weight and type are
rollers in the incorrect.
fuser unit.
The paper is light.
There are nearly solid fill
on the leading edge of
the paper.
The paper twists Paper is too light or thin.
around the
the paper guide and paper
stopper to the paper.
For the MP tray, adjust the
manual feeding paper guide to
the paper.
Load the envelopes correctly.
Load the paper, envelopes, or
labels whose weight is 221 to
(56 to 256 g/m
2 2
MP tray.
Close the rear output tray firmly.
Check the paper tray, and then
select the correct tray in [Paper
Feeding Source] on the printer
driver.
Load paper in the MP tray, and
then select [Start] on the
operator panel.
Alternatively, disable the [Use MP
tray as manual feed] setting on
the printer driver.
Set Tray 2/3/4 with the printer
driver.
Open and close the output tray.
Use paper stored under proper
temperature and humidity
conditions.
Press [Device Settings], select
[Paper Setup] > [(tray name)] >
[Media Weight], and then specify
a lighter weight.
Press [Device Settings], select
[Paper Setup] > [(tray name)] >
[Media Type]/[Media Weight],
and then specify the appropriate
values.
Alternatively, specify heavier
weight in [Media Weight].
Use heavier paper.
Insert a margin into the leading
edge of the paper.
For duplex printing, insert a
margin into the bottom edge of
the paper as well.
Use heavier paper.
797
(56 to 95 lb) is in the
Paper
Loading
Paper
Loading
Paper
Setting
Output Tray
-
Printing
Manually
One by One
Installing the
Additional
Tray Unit(s)
to the
Machine
-
Loading
Paper
Loading
Paper
Loading
Paper
-
-
-