Adjusting Color Balance (Density) - Oki MC853 User Manual

Adjusting Color Balance (Density)

When you adjust the shade to suit your preferences, operate from the operator panel.
To specify, darken or lighten pale part (Highlight), middle tone part (Mid-tone), and dark
part (Dark) of each color.
This section describes how to adjust for cyan. When adjusting other colors, perform the
same procedure to all colors and parts you want to adjust.
1.
Press [Device Setting].
2.
Press or
3.
Enter the administrator name and password and press [OK].
The factory default administrator name and password are "admin" and "aaaaaa"
respectively.
4.
Press or
5.
Press [Color Menu].
6.
Press [Color Tuning/Print Pattern] and [Yes] to print color
adjustment pattern.
7.
Press [Cyan Tuning].
8.
The sliders for Highlight, Mid-Tone, and Dark are displayed. Select
the values, and then press [OK].
Memo
To darken a little, select +1 to +3, to lighten a little, select -1 to -3.
9.
Press the
10.
Start printing.
Repeat the procedure until the color shade meets your preferences.
several times and press [Admin Setup].
several times and press [Print Setup].
(HOME) button.
361