Table of Contents
Advertisement
R
EGISTERING CUSTOM SIZES
To load custom size paper, you need to register the width and length of the paper before
printing.
The range of the sizes you can set differs according to the paper tray.
TRAY
Tray 1
Tray 2 (optional)
MP tray
NOTE
For tray 1 and tray 2, you can configure the
is set to
Size
The available size range for duplex printing is the same as that for tray 2.
1.
Press the SETTING button on the control panel.
2.
Using the Down arrow key, scroll to Paper Setup and press OK.
3.
Using the arrow keys, scroll to the required paper tray and press OK.
4.
Using the Down arrow key, scroll to Custom and press OK.
5.
Using the keypad, enter the Width and Length of the loaded paper.
Press the Right arrow key to move between digits.
6.
Press OK.
7.
Press the Left arrow key to exit the menu.
AVAILABLE SIZE RANGE
Width: 105 to 216 mm (4.1 to 8.5 inches)
Length: 148 to 356 mm (5.8 to 14.0 inches)
Width: 148 to 216 mm (5.8 to 8.5 inches)
Length: 210 to 356 mm (8.3 to 14.0 inches)
Width: 64 to 216 mm (2.5 to 8.5 inches)
Length: 127 to 1321 mm (5.0 to 52.0 inches)
.
Custom
Loading paper > 37
setting only when
Custom
Paper
Advertisement
Table of Contents
