Table of Contents
Advertisement
16.
Click [Submit].
Registering a Destination (Profile) from the Operator
Panel
This section describes how to register profiles from the operator panel.
1.
Press [Device Settings] on the touch panel.
2.
Press [Profile].
3.
Select a number, and then press [Register].
4.
Enter a profile name, and then press [Next].
5.
Select a setting, and then press [Next].
6.
Enter the values of the transmission destination computer name
and the shared folder name in the " the transmission destination
computer name the shared folder name" format.
Example:
PC1 share
Memo
If there is no DNS server in the network, you cannot specify the computer with the
computer name (the transmission destination computer name). In such a case, use
the IP address of the computer to set.
Example:
7.
Press [Next].
8.
If access privileges are set to the shared folder, enter the user
name and password in [User Name] and [Password].
Note
If domain management is performed, enter "User name@domain name".
If domain management is performed and you cannot establish a connection even after
entering "User name@domain name", delete "@domain name".
Also, access the Web page of this machine, select [Admin Setup] > [Network Menu],
and then set the NetBIOS domain name in [Workgroup name] in [NBT].
192.168.0.3 share
238
Advertisement
Table of Contents
