Adjusting Brightness
To change the brightness of the touch panel on the operator panel, perform the procedure
below.
You can adjust the brightness of screen during operation and in the Power Save mode
respectively.
1.
Press [Device Settings] on the touch panel.
2.
Press
or
3.
Enter the administrator name and password and press [OK].
The factory default administrator name and password are "admin" and "aaaaaa"
respectively.
4.
Press
or
5.
Press [System Setup].
6.
Press
or
Operating] or [Panel Brightness While Power Save].
7.
Enter value and press [OK].
Available values are from 1 to 7. The bigger the number is, the brighter the screen
gets.
several times, and press [Admin Setup].
several times, and press [Management].
several times, and press [Panel Brightness During
841