Auto Save On Crash Or Rollover; Last Restart Reason; Line Card Restart Causes And Reasons; Hardware Watchdog Timer - Dell Z9000 Configuration Manual

Auto Save on Crash or Rollover

Exception information for master or standby units is stored in the flash:/TRACE_LOG_DIR directory. This
directory contains files that save trace information when there has been a task crash or timeout.
On a master unit, you can reach the TRACE_LOG_DIR files by FTP or by using the show file command
from the flash://TRACE_LOG_DIR directory.
NOTE: Non-management member units do not support this functionality.

Last Restart Reason

If a Z9000 system restarted for some reason (automatically or manually), the show system command
output includes the reason for the restart.
The following table shows the reasons displayed in the output and their corresponding causes.

Line Card Restart Causes and Reasons

Causes
Remote power cycle of the chassis
reload
reboot after a crash

Hardware Watchdog Timer

The hardware watchdog command automatically reboots an Dell Networking OS switch/router when a
unit is unresponsive.
This is a last resort mechanism intended to prevent a manual power cycle.

show hardware Commands

These commands display information from a hardware subcomponent and from hardware-based feature
tables.
NOTE: Use the show hardware commands only under the guidance of the Dell Networking
Technical Assistance Center (TAC).
• View internal interface status of the stack-unit CPU port which connects to the external management
interface.
show hardware stack-unit {0-11} cpu management statistics
• View driver-level statistics for the data-plane port on the CPU for the specified stack-unit.
show hardware stack-unit {0-11} cpu data-plane statistics
It provides insight into the packet types entering the CPU to see whether CPU-bound traffic is internal
(IPC traffic) or network control traffic, which the CPU must process.
• View the modular packet buffers details per stack unit and the mode of allocation.
show hardware stack-unit {0-11} buffer total-buffer
• View the modular packet buffers details per unit and the mode of allocation.
940
Displayed Reasons
push-button reset
soft reset
soft reset
Z-Series Debugging and Diagnostics