FTOS(conf-if-range-fo-0/48,fo-0/52)#flowcontrol rx on tx off
FTOS(conf-if-range-fo-0/48,fo-0/52)#port-channel-protocol lacp
FTOS(conf-if-range-fo-0/48,fo-0/52-lacp)#port-channel 1 mode active
FTOS(conf-if-range-fo-0/48,fo-0/52-lacp)#exit
FTOS(conf-if-range-fo-0/48,fo-0/52)#exit
FTOS(conf)#exit
2.13
Save configuration
FTOS#copy running-config startup-config
2.14
Configure additional switch
Repeat the commands from Section 2 to configure the second switch.
10
SCG1007
Dell Networking S5000 Switch Configuration Guide for EqualLogic SANs