Sending System Messages To A Syslog Server; Configuring A Unix System As A Syslog Server; Changing System Logging Settings - Dell Z9000 Configuration Manual

10/25/40/50/100gbe throughput
Hide thumbs Also See for Z9000:
Table of Contents

Advertisement

Disable console logging.
CONFIGURATION mode
no logging console

Sending System Messages to a Syslog Server

To send system messages to a specified syslog server, use the following command. The following syslog
standards are supported: RFC 5424 The SYSLOG Protocol, R.Gerhards and Adiscon GmbH, March 2009,
obsoletes RFC 3164 and RFC 5426 Transmission of Syslog Messages over UDP.
Specify the server to which you want to send system messages. You can configure up to eight syslog
servers.
CONFIGURATION mode
logging {ip-address | ipv6-address | hostname} {{udp {port}} | {tcp {port}}}

Configuring a UNIX System as a Syslog Server

To configure a UNIX System as a syslog server, use the following command.
Configure a UNIX system as a syslog server by adding the following lines to /etc/syslog.conf on the
UNIX system and assigning write permissions to the file.
– Add line on a 4.1 BSD UNIX system. local7.debugging /var/log/ftos.log
– Add line on a 5.7 SunOS UNIX system. local7.debugging /var/adm/ftos.log
In the previous lines, local7 is the logging facility level and debugging is the severity level.

Changing System Logging Settings

You can change the default settings of the system logging by changing the severity level and the storage
location.
The default is to log all messages up to debug level, that is, all system messages. By changing the severity
level in the logging commands, you control the number of system messages logged.
To specify the system logging settings, use the following commands.
Specify the minimum severity level for logging to the logging buffer.
CONFIGURATION mode
logging buffered level
Specify the minimum severity level for logging to the console.
CONFIGURATION mode
logging console level
Specify the minimum severity level for logging to terminal lines.
CONFIGURATION mode
logging monitor level
Specify the minimum severity level for logging to a syslog server.
CONFIGURATION mode
Management
65

Advertisement

Table of Contents
loading

Table of Contents