Evlt Configuration Step Examples - Dell Z9000 Configuration Manual

10/25/40/50/100gbe throughput

Hide thumbs Also See for Z9000:

Table of Contents

Figure 116. eVLT Configuration Example

eVLT Configuration Step Examples

In Domain 1, configure the VLT domain and VLTi on Peer 1.

Domain_1_Peer1#configure

Domain_1_Peer1(conf)#interface port-channel 1

Domain_1_Peer1(conf-if-po-1)# channel-member TenGigabitEthernet 1/8-9

Domain_1_Peer1(conf)#vlt domain 1000

Domain_1_Peer1(conf-vlt-domain)# peer-link port-channel 1

Domain_1_Peer1(conf-vlt-domain)# back-up destination 10.16.130.11

Domain_1_Peer1(conf-vlt-domain)# system-mac mac-address 00:0a:00:0a:00:0a

Domain_1_Peer1(conf-vlt-domain)# unit-id 0

Configure eVLT on Peer 1.

Domain_1_Peer1(conf)#interface port-channel 100

Domain_1_Peer1(conf-if-po-100)# switchport

Domain_1_Peer1(conf-if-po-100)# vlt-peer-lag port-channel 100

Domain_1_Peer1(conf-if-po-100)# no shutdown

Add links to the eVLT port-channel on Peer 1.

Domain_1_Peer1(conf)#interface range tengigabitethernet 1/16 - 17

Domain_1_Peer1(conf-if-range-te-1/16-17)# port-channel-protocol LACP

Domain_1_Peer1(conf-if-range-te-1/16-17)# port-channel 100 mode active

Domain_1_Peer1(conf-if-range-te-1/16-17)# no shutdown

Next, configure the VLT domain and VLTi on Peer 2.

Domain_1_Peer2#configure

Domain_1_Peer2(conf)#interface port-channel 1

Domain_1_Peer2(conf-if-po-1)# channel-member TenGigabitEthernet 1/8-9

Domain_1_Peer2(conf) #vlt domain 1000

Domain_1_Peer2(conf-vlt-domain)# peer-link port-channel 1

Virtual Link Trunking (VLT)