Dell Z9000 Configuration Manual page 920

can copy and paste from the example to your CLI. To support your own IP addresses, interfaces, names,
and so on, be sure that you make the necessary changes. The VRRP topology was created using the CLI
configuration shown in the following example.
Figure 118. VRRP for IPv4 Topology
Examples of Configuring VRRP for IPv4 and IPv6
The following example shows configuring VRRP for IPv4 Router 2.
R2(conf)#interface tengigabitethernet 2/31
R2(conf-if-te-2/31)#ip address 10.1.1.1/24
R2(conf-if-te-2/31)#vrrp-group 99
R2(conf-if-te-2/31-vrid-99)#priority 200
R2(conf-if-te-2/31-vrid-99)#virtual 10.1.1.3
R2(conf-if-te-2/31-vrid-99)#no shut
R2(conf-if-te-2/31)#show conf
920
Virtual Router Redundancy Protocol (VRRP)