Link Layer Discovery Protocol (Lldp); 802.1Ab (Lldp) Overview; Protocol Data Units - Dell Z9000 Configuration Manual

Link Layer Discovery Protocol (LLDP)

The link layer discovery protocol (LLDP) is supported on Dell Networking OS.

802.1AB (LLDP) Overview

LLDP — defined by IEEE 802.1AB — is a protocol that enables a local area network (LAN) device to
advertise its configuration and receive configuration information from adjacent LLDP-enabled LAN
infrastructure devices.
The collected information is stored in a management information base (MIB) on each device, and is
accessible via simple network management protocol (SNMP).

Protocol Data Units

Configuration information is exchanged in the form of Type, Length, Value (TLV) segments.
• Type — The kind of information included in the TLV.
• Length — The value, in octets, of the TLV after the Length field.
• Value — The configuration information that the agent is advertising.
The chassis ID TLV is shown in the following illustration.
Figure 59. Type, Length, Value (TLV) Segment
TLVs are encapsulated in a frame called an LLDP data unit (LLDPDU) (shown in the following table), which
is transmitted from one LLDP-enabled device to its LLDP-enabled neighbors. LLDP is a one-way
protocol. LLDP-enabled devices (LLDP agents) can transmit and/or receive advertisements, but they
cannot solicit and do not respond to advertisements.
There are five types of TLVs. All types are mandatory in the construction of an LLDPDU except Optional
TLVs. You can configure the inclusion of individual Optional TLVs.
Link Layer Discovery Protocol (LLDP)
25
461