Dell Z9000 Configuration Manual page 805

10/25/40/50/100gbe throughput

Hide thumbs Also See for Z9000:

Table of Contents

When you query an icmpStatsInErrors object in the icmpStats table by using the snmpget or

snmpwalk command, the output for IPv4 addresses may be incorrectly displayed. To correctly display

this information under IP and ICMP statistics, use the show ip traffic command.

When you query an IPv4 icmpMsgStatsInPkts object in the ICMP table by using the snmpwalk

command, the echo response output may not be displayed. To correctly display ICMP statistics, such

as echo response, use the show ip traffic command.

Simple Network Management Protocol (SNMP)

Troubleshooting