Guest And Authentication-Fail Vlans - Dell Z9000 Configuration Manual

10/25/40/50/100gbe throughput
Hide thumbs Also See for Z9000:
Table of Contents

Advertisement

Figure 7. Dynamic VLAN Assignment
1.
Configure 8021.x globally (refer to
(refer to the illustration
2.
Make the interface a switchport so that it can be assigned to a VLAN.
3.
Create the VLAN to which the interface will be assigned.
4.
Connect the supplicant to the port configured for 802.1X.
5.
Verify that the port has been authorized and placed in the desired VLAN (refer to the illustration in
Dynamic VLAN Assignment with Port

Guest and Authentication-Fail VLANs

Typically, the authenticator (the Dell system) denies the supplicant access to the network until the
supplicant is authenticated. If the supplicant is authenticated, the authenticator enables the port and
places it in either the VLAN for which the port is configured or the VLAN that the authentication server
indicates in the authentication data.
NOTE: Ports cannot be dynamically assigned to the default VLAN.
92
Enabling
802.1X) along with relevant RADIUS server configurations
inDynamic VLAN Assignment with Port
Authentication).
Authentication).
802.1X

Advertisement

Table of Contents
loading

Table of Contents