Protocol Separation - Dell Z9000 Configuration Manual

10/25/40/50/100gbe throughput

Hide thumbs Also See for Z9000:

Table of Contents

routes. If SSH is specified as a management application, SSH links to and from an unknown destination

uses the management default route.

Protocol Separation

When you configure the application application-type command to configure a set of

management applications with TCP/UDP port numbers to the OS, the following table describes the

association between applications and their port numbers.

Table 14. Association Between Applications and Port Numbers

Application Name

Sflow-Collector

162 for SNMP Traps (client),

161 for SNMP MIB response (server)

80 for httpd

443 for secure httpd

8008 HTTP server port for confd application

8888 secure HTTP server port for confd

If you configure a source interface is for any EIS management application, EIS might not coexist with that

interface and the behavior is undefined in such a case. You can configure the source interface for the

following applications: FTP, ICMP (ping and traceroute utilities), NTP, RADIUS, TACACS, Telnet, TFTP,

syslog, and SNMP traps. Out of these applications, EIS can coexist with only syslog and SNMP traps

because these applications do not require a response after a packet is sent.

The switch also processes user-specified port numbers for applications such as RADIUS, TACACS, SSH,

and sFlow. The OS maintains a list of configured management applications and their port numbers. You

Internet Group Management Protocol (IGMP)