Copying The Startup-Config Files To The Running-Config; Copying The Startup-Config Files To The Server Via Ftp - Dell Z9000 Configuration Manual
10/25/40/50/100gbe throughput
Hide thumbs
Also See for Z9000:
- Configuration manual (932 pages) ,
- Installing (52 pages) ,
- Manual (48 pages)
Table of Contents
Advertisement
•
Copy the running-config to the startup-config from the UNIX machine.
snmpset -v 2c -c public force10system-ip-address copySrcFileType.index i 2
copyDestFileType.index i 3
Examples of Copying Configuration Files
The following examples show the command syntax using MIB object names and the same command
using the object OIDs. In both cases, a unique index number follows the object.
The following example shows copying configuration files using MIB object names.
> snmpset -v 2c -r 0 -t 60 -c private -m ./f10-copy-config.mib 10.10.10.10
copySrcFileType.101
i 2 copyDestFileType.101 i 3
FTOS-COPY-CONFIG-MIB::copySrcFileType.101 = INTEGER: runningConfig(2)
FTOS-COPY-CONFIG-MIB::copyDestFileType.101 = INTEGER: startupConfig(3)
The following example shows copying configuration files using OIDs.
> snmpset -v 2c -c public -m ./f10-copy-config.mib 10.10.10.10
.1.3.6.1.4.1.6027.3.5.1.1.1.1.2.100 i 2 .1.3.6.1.4.1.6027.3.5.1.1.1.1.5.100 i 3
FTOS-COPY-CONFIG-MIB::copySrcFileType.100 = INTEGER: runningConfig(2)
FTOS-COPY-CONFIG-MIB::copyDestFileType.100 = INTEGER: startupConfig(3)
Copying the Startup-Config Files to the Running-Config
To copy the startup-config to the running-config from a UNIX machine, use the following command.
•
Copy the startup-config to the running-config from a UNIX machine.
snmpset -c private -v 2c force10system-ip-address copySrcFileType.index i 3
copyDestFileType.index i 2
Examples of Copying Configuration Files from a UNIX Machine
The following example shows how to copy configuration files from a UNIX machine using the object
name.
> snmpset -c public -v 2c -m ./f10-copy-config.mib 10.11.131.162
copySrcFileType.7 i 3
copyDestFileType.7 i 2
FTOS-COPY-CONFIG-MIB::copySrcFileType.7 = INTEGER: runningConfig(3)
FTOS-COPY-CONFIG-MIB::copyDestFileType.7 = INTEGER: startupConfig(2)
The following example shows how to copy configuration files from a UNIX machine using OID.
>snmpset -c public -v 2c 10.11.131.162 .1.3.6.1.4.1.6027.3.5.1.1.1.1.2.8 i 3
.1.3.6.1.4.1.6027.3.5.1.1.1.1.5.8 i 2
SNMPv2-SMI::enterprises.6027.3.5.1.1.1.1.2.8 = INTEGER: 3
SNMPv2-SMI::enterprises.6027.3.5.1.1.1.1.5.8 = INTEGER: 2
Copying the Startup-Config Files to the Server via FTP
To copy the startup-config to the server via FTP from the UNIX machine, use the following command.
Copy the startup-config to the server via FTP from the UNIX machine.
snmpset -v 2c -c public -m ./f10-copy-config.mib force10system-ip-address
copySrcFileType.index i 2 copyDestFileName.index s filepath/filename
copyDestFileLocation.index i 4 copyServerAddress.index a server-ip-address
Simple Network Management Protocol (SNMP)
793
Advertisement
Table of Contents
Troubleshooting
