Telnet Access Configuration Examples Using Local Users With Password Security Disabled; Local Password Configuration - Password Security Disabled - Avaya ERS 2500 Technical Configuration Manual

The default user names can be changed using the following CLI command:

ERS-Stackable(config)# username <user_name> <user_password> <switch|stack>
<ro|rw>.
3.4 Telnet Access Configuration Examples using Local
Users with Password Security disabled

3.4.1 Local Password Configuration - Password Security Disabled

For this configuration example, we will configure the following assuming we are using an
ERS5000 stack

Change the default read-write user name from RW to user1

Change the default read-only user name from RO to user2

Disable Password Security
o
This applies to secure version as Password Security is enabled by default on
SSH switch server

For user1, use the password rwaccess

For user2, use the password roaccess
ERS-STACKABLE: Step 1 – Enable Password Security
ERS-Stackable(config)# no password security
ERS-STACKABLE: Step 2 – Add new user names and passwords
ERS-Stackable(config)# username user1 rwaccess stack rw
ERS-Stackable(config)# username user1 rwaccess switch rw
ERS-Stackable(config)# username user2 roaccess stack ro
ERS-Stackable(config)# username user2 roaccess switch ro
ERS-STACKABLE: Step 3 – Enable telnet local authentication
ERS-Stackable(config)# cli password stack telnet local
ERS-Stackable(config)# cli password switch telnet local
Avaya Inc. – External Distribution
avaya.com
11