Oc48/Stm16 Sr/Sh 16 Port 1310 Specifications; Table A-6 Oc48/Stm16 Sr/Sh 16 Port 1310 Card Specifications - Cisco ONS 15600 Reference Manual

A.2.4 OC48/STM16 SR/SH 16 Port 1310 Specifications
A.2.4 OC48/STM16 SR/SH 16 Port 1310 Specifications
Table A-6
Table A-6
Specification Type
Line
Transmitter
Receiver
Loopback mode
Operating temperature
Operating humidity
Dimensions
Compliance
Cisco ONS 15600 SDH Reference Manual, Release 9.0
A-8
shows the OC48/STM16 SR/SH 16 Port 1310 card specifications.
OC48/STM16 SR/SH 16 Port 1310 Card Specifications
Description
Bit rate: 2.49 Gbps
Code: Scrambled NRZ
Fiber: 1310 nm single-mode
Loopback mode: Facility
Connectors: OGI
Compliance: Telcordia GR-253
Max. transmitter output power: –3 dBm
Min. transmitter output power: –10 dBm
Center wavelength: 1266 nm to 1360 nm
Nominal wavelength: 1310 nm
Transmitter: Fabry Perot laser
The CTC Maintenance > Transceiver tab shows the OPT levels. CTC
Note
might show OPT levels at 1 dBm greater or less than the actual card
OPT level.
Max. receiver level: –3 dBm
Min. receiver level: –18 dBm
Receiver: Positive-intrinsic-negative (PIN) diode
Link loss budget: 8 dBm min., with 1 dBm dispersion penalty
Facility (Line)
You must use a 3-dBm fiber attenuator when connecting a fiber
Note
loopback to an OC48/STM16 SR/SH 16 port 1310 card. Never
connect a direct fiber loopback.
23 to 122 degrees Fahrenheit (–5 to +50 degrees Celsius)
5 to 95 percent, noncondensing
Height: 16.50 in. (419 mm)
Width: 1.50 in. (38 mm)
Depth: 18.31 in. (465 mm)
Card weight: 5.0 lb (2.27 kg)
Telcordia GR-253
When installed in a node, ONS 15600 SDH cards comply with these safety
standards: UL 60950, CSA C22.2 No. 950, EN 60950, IEC 60950
Eye safety compliance: Class 1 (21 CFR 1040.10 and 1040.11) and Class 1
(IEC 60825) laser products
Appendix A Hardware Specifications
78-18400-01