Subscriber Services; Table 25: Subscriber Services (Description) - Alcatel-Lucent 7750 Reference Manual

Subscriber Services

Table 25: Subscriber Services (description)

Attribute ID Attribute Name
26-6527-151 Alc-Sub-Serv-Activate
26-6527-152 Alc-Sub-Serv-
Deactivate
26-6527-153 Alc-Sub-Serv-Acct-
Stats-Type
26-6527-154 Alc-Sub-Serv-Acct-
Interim-Ivl
26-6527-155 Alc-Sub-Serv-Internal
7750 SR RADIUS Attributes Reference Guide
Activate a subscriber service. The attribute typically contains parameters as
input for the Python script that populates the subscriber service data structure
(sub_svc). The attribute is ignored if not used in Python.
The parameters can cross an attribute boundary. The concatenation of all Alc-
Sub-Serv-Activate attributes with the same tag in a single message is typically
used as a unique subscriber service instance identifier (key).
In subscriber service RADIUS accounting messages, the attribute is sent
untagged and contains the subscriber service data structure sub_svc.name
value used at service activation. Multiple attributes may be present if the total
length does not fit a single attribute.
Deactivate a subscriber service. The attribute typically contains parameters as
input for the Python script that populates the subscriber service data structure
(sub_svc). The attribute is ignored if not used in Python.
The parameters can cross an attribute boundary. The concatenation of all Alc-
Sub-Serv-Deactivate attributes with the same tag in a single message is
typically used as the unique subscriber service instance identifier (key).
Enable or disable subscriber service accounting and specify the stats type:
volume and time or time only. The attribute is used as input for the Python
script that populates the subscriber service data structure
(sub_svc.acct_stats_type). The attribute is ignored if not used in Python.
The subscriber service accounting statistics type cannot be changed for an
active subscriber service.
The interim accounting interval in seconds at which Acct-Interim-Update
messages should be generated for subscriber service accounting. The attribute
is used as input for the Python script that populates the subscriber service data
structure (sub_svc.acct_interval). The attribute is ignored if not used in
Python.
sub_svc.acct_interval overrides the local configured update-interval value in
the subscriber profile policy. With value = 0, the interim accounting is
switched off. The subscriber service accounting interim interval cannot be
changed for an active subscriber service.
For internal use only
RADIUS Attributes Reference
Description
Page 99