Alcatel-Lucent 7750 Reference Manual page 215

Service router radius attributes
Table of Contents

Advertisement

Table 65: Application Assurance Accounting (description) (Continued)
Attribute ID
Attribute Name
55
Event-Timestamp
26-6527-11
Alc-Subsc-ID-Str
26-6527-19
Alc-Acct-I-Inprof-
Octets-64
26-6527-21
Alc-Acct-O-Inprof-
Octets-64
26-6527-23
Alc-Acct-I-Inprof-Pkts-
64
26-6527-25
Alc-Acct-O-Inprof-
Pkts-64
26-6527-45
Alc-App-Prof-Str
26-6527-156
Alc-AA-Group-
Partition-Isa-Id
26-6527-157
Alc-AA-Peer-Identifier
7750 SR RADIUS Attributes Reference Guide
Record the time that this event occurred on the NAS, in seconds since January
1, 1970 00:00 UTC
AA-subscriber string name, used together with the AA-subscriber type to
construct the [44] Acct-Session-Id. Sent in all Acct Start, Interim Updates and
Stop messages. This attribute has the same content as [1] User-Name for AA
RADIUS Accounting.
Identify a charging group, app-group or application and its corresponding total
ingress in-profile bytes. Report cumulative volume of pre-configured AA-
subscriber charging group, app-group or application since the start of the
session (as described in RFC2689) in Acct Interim Update or Stop messages.
Identify a charging group, app-group or application and its corresponding total
egress in-profile bytes. Report cumulative volume of pre-configured aa-
subscriber charging group, app-group or application since the start of the
session (as described in RFC2689) in Acct Interim Update or Acct Stop.
Identify a charging group, app-group or application and its corresponding total
ingress in-profile packets. Report cumulative volume of pre-configured aa-
subscriber charging group, app-group or application since the start of the
session (as described in RFC2689) in Acct Interim Update or Acct Stop.
Identify a charging group, app-group or application and its corresponding total
egress in-profile packets. Report cumulative volume of pre-configured aa-
subscriber charging group, app-group or application since the start of the
session (as described in RFC2689) in Acct Interim Update or Acct Stop.
Designate the AA-subscriber current application profile. Sent in all Acct Start,
Interim Update and Stop messages.
Designate the AA Group/partition and the ISA card assigned to the AA-
subscriber reported in the Accounting Statistics. Sent in all Acct requests. The
ISA id allows to monitor ISA card switch over.
Specifies Application-Assurance RADIUS Peer Information and used by the
PCRF(DSC) to autodiscover redundant AA nodes.When AA Seen IP (Seen-IP
transit subscriber notification provides RADIUS Accounting Start notification
of the IP addresses and location of active subscribers within a parent AA
service) is used together with AARP (asymmetry removal that is required to
remove routing asymmetry when using redundant transit-aa-nodes), meaning
you have 2 redundant transit 7750 node, we expect PCRF(DSC) to push a
CoA create to both 7x50 nodes. This is achieved by adding the peer-identifier
information in the original Accounting-start sent by the primary 7x50.
RADIUS Attributes Reference
Description
Page 215

Advertisement

Table of Contents
loading

Table of Contents