Alcatel-Lucent 7750 Reference Manual page 163

Table 52: Enhanced Subscriber Management Accounting (description) (Continued)
Attribute ID Attribute Name
26-6527-92 Alc-Acct-OC-O-Outpr-
Pack-Drop_64
26-6527-93 Alc-Acct-OC-O-Inpr-
Octs-Drop_64
26-6527-94 Alc-Acct-OC-O-Outpr-
Octs-Drop_64
26-6527-99 Alc-Ipv6-Address
26-6527-100 Alc-Serv-Id
7750 SR RADIUS Attributes Reference Guide
HSMDA override counter: counts egress dropped packets
• no queue stat-mode:
Count out-of-profile packets (IPv4 and IPv6)
[26-6527-127] Alc-Acct-O-statmode VSA not included
• queue stat-mode = v4-v6:
Count IPv6 packets (in- and out-of-profile)
[26-6527-127] Alc-Acct-O-statmode VSA included with value v4-v6
Up to eight hsmda-counter-override counters can be specified in CLI
(configure qos sap- egress <policy-id> prec|dscp|ip-criteria|ipv6-criteria).
HSMDA override counter: counts egress dropped bytes
• no queue stat-mode:
Count in-profile bytes (IPv4 and IPv6)
[26-6527-127] Alc-Acct-O-statmode VSA not included
• queue stat-mode = v4-v6:
Count IPv4 bytes (in- and out-of-profile)
[26-6527-127] Alc-Acct-O-statmode VSA included with value v4-v6
Up to eight hsmda-counter-override counters can be specified in CLI
(configure qos sap- egress <policy-id> prec|dscp|ip-criteria|ipv6-criteria).
HSMDA override counter: counts egress dropped bytes
• no queue stat-mode:
Count out-of-profile bytes (IPv4 and IPv6)
[26-6527-127] Alc-Acct-O-statmode VSA not included
• queue stat-mode = v4-v6:
Count IPv6 bytes (in- and out-of-profile)
[26-6527-127] Alc-Acct-O-statmode VSA included with value v4-v6
Up to eight hsmda-counter-override counters can be specified in CLI
(configure qos sap- egress <policy-id> prec|dscp|ip-criteria|ipv6-criteria).
The ipv6 address to be configured to the WAN side of the user (IPoE,PPPoE)
via DHCPv6 (IA-NA). Maps to DHCPv6 option IA-NA[3] sub-option IA-
Address[5] address. This attribute is an alternative to [97] Framed-IPv6-Prefix
and [100] Framed-IPv6-Pool, which also assigns IPv6 addressing to the wan-
side of a host via SLAAC or DHCPv6 IA-NA. Attribute is omitted in
accounting via configure subscriber-mgmt radius-accounting-policy
<name> include-radius-attribute no ipv6-address.
For Distributed Subscriber Management (DSM), if IA-NA is active for a UE,
the attribute contains the address assigned to this UE. Inclusion of this
attribute is enabled via configure aaa isa-radius-policy <policy-name> acct-
include-attributes ipv6-address.
DSM only. The attribute contains the service ID where the Layer 3 tunnel is
terminated. The attribute is omitted in case of a Layer 2 tunnel or if the service
ID is not known.
RADIUS Attributes Reference
Description
Page 163