Accounting Terminate Causes; Table 74: Accounting Terminate Causes - Alcatel-Lucent 7750 Reference Manual

Accounting Terminate Causes

Accounting Terminate Causes
Table 74
Cause attribute.

Table 74: Accounting Terminate Causes

Code Acct Terminate
Cause
1 User-Request
2 Lost-Carrier
3 Lost-Service
4 Idle-Timeout
5 Session-Timeout
6 Admin-Reset
7 Admin-Reboot
8 Port-Error
9 NAS-Error
10 NAS-Request
11 NAS-Reboot
12 Port-Unneeded
13 Port-Preempted
14 Port-Suspended
15 Service-
Unavailable
16 Callback
17 User-Error
Page 228
specifies the different Terminate Causes generated by the SR OS in [49] Acct-Terminate-
User requested termination of service, for example, with LCP
Terminate or by logging out.
Data Carrier Detect (DCD) was dropped on the port
Service can no longer be provided; for example, user's connection to
a host was interrupted.
Idle timer expired
Maximum session length timer expired
Administrator reset the port or session
Administrator is ending service on the NAS, for example, prior to
rebooting the NAS.
NAS detected an error on the port which required ending the session
NAS detected some error (other than on the port) which required
ending the session
NAS ended session for a non-error reason not otherwise listed here.
The NAS ended the session in order to reboot non-administratively
(crash).
NAS ended session because resource usage fell below low-water
mark (for example, if a bandwidth-on-demand algorithm decided that
the port was no longer needed).
NAS ended session in order to allocate the port to a higher priority
use
NAS ended session to suspend a virtual session
NAS was unable to provide requested service
NAS is terminating current session in order to perform callback for a
new session
Input from user is in error, causing termination of session.
Description
7750 SR RADIUS Attributes Reference Guide
SR OS
yes
yes
yes
yes
yes
yes
no
yes
yes
yes
yes
no
no
yes
yes
no
no