Alcatel-Lucent 7750 Reference Manual page 43

Table 3: Subscriber Host Identification (limits) (Continued)
Attribute Attribute
ID Name
101 Error-Cause
123 Delegated-
IPv6-Prefix
26-2352-1 Client-DNS-
Pri
26-2352-2 Client-DNS-
Sec
26-2352- Ip-Address-
36 Pool-Name
26-2352- RB-Client-
99 NBNS-Pri
26-2352- RB-Client-
100 NBNS-Sec
26-3561-1 Agent-Circuit-
Id
26-3561-2 Agent-
Remote-Id
26-3561- Actual-Data-
129 Rate-
Upstream
26-3561- Actual-Data-
130 Rate-
Downstream
7750 SR RADIUS Attributes Reference Guide
Type Limits
octets 4 Bytes
ipv6prefix max. 16 Bytes
for prefix + 1
Byte for length
ipaddr 4 Bytes
ipaddr 4 Bytes
string 65 chars
ipaddr 4 Bytes
ipaddr 4 Bytes
string 247 chars
string 247 chars
integer 4294967295 bps
integer 4294967295 bps
RADIUS Attributes Reference
SR OS Format
Current supported causes are: Missing Attribute[402],
NAS Identification Mismatch[403], Invalid
Request[404], Unsupported Service[405], Invalid
Attribute Value[407], Administratively Prohibited
[501], Session Context Not Found [503], Resources
Unavailable[506]
For example: Error-Cause = Invalid Request
<ipv6-prefix/prefix-length> with prefix-length [48..64]
For example: Delegated-IPv6-Prefix
2001:DB8:173A:100::/56
For example: Client-DNS-Pri = 9.1.1.1
For example: Client-DNS-Sec = 9.1.1.2
For example: Ip-Address-Pool-Name = Address_Pool_1
For example: RB-Client-NBNS-Pri = 9.1.1.1
For example: RB-Client-NBNS-Sec = 9.1.1.2
format see also RFC4679
# ATM/DSL <Access-Node-Identifier><atm slot/
port:vpi.vci>
# Ethernet/DSL <Access-Node-Identifier><eth slot/
port[:vlan-id]>
For example: ethernet dslam1 slot 2 port 1 vlan 100
Agent-Circuit-Id = dslam1 eth 2/1:100
Format see also RFC4679
For example: Agent-Remote-Id = MyRemoteId
For example: # 1Mbps
Actual-Data-Rate-Upstream = 1000000
For example: # 5Mbps
Actual-Data-Rate-Downstream = 5000000
Page 43