Alcatel-Lucent 7750 Reference Manual page 205

Table 62: L2TP Tunnel Accounting (description) (Continued)
Attribute ID Attribute Name
41 Acct-Delay-Time
42 Acct-Input-Octets
43 Acct-Output-Octets
44 Acct-Session-Id
46 Acct-Session-Time
47 Acct-Input-Packets
48 Acct-Output-Packets
49 Acct-Terminate-Cause
7750 SR RADIUS Attributes Reference Guide
Indicates how many seconds the client has been trying to send this accounting
record for. This attribute is included with value 0 in all initial accounting
messages. Attribute is omitted in accounting via configure subscriber-mgmt
radius-accounting-policy <name> include-radius-attribute no acct-delay-
time.
Tunnel-link and Tunnel level accounting uses the ESM accounting statistics.
For Tunnel Link Stop it reports the input bytes for this user over the course of
this service being provided. For Tunnel Stop this attribute represent an
aggregate of input bytes of all sessions that belong(ed) to this tunnel over the
course of this service being provided. Attribute [52] Acct-Output-Gigawords
indicates how many times (if greater than zero) the [42] Acct-Input-Octets
counter has wrapped around 2^32 in the course of delivering this service.
Tunnel-link and Tunnel level accounting uses the ESM accounting statistics.
For Tunnel Link Stop it reports the output bytes for this user over the course
of this service being provided. For Tunnel Stop this attribute represent an
aggregate of output bytes of all sessions that belong(ed) to this tunnel over the
course of this service being provided. Attribute [53] Acct-Output-Gigawords
indicates how many times (if bigger than zero) the [43] Acct-Output-Octets
counter has wrapped around 2^32 in the course of delivering this service.
Is a unique generated number and maps for the Tunnel-link stop to the
accounting-session-id of the PPPoE session (show service id ppp session
detail). For Tunnel-stop accounting it is longer and a concatenation of start-
time and connection-id with delimiter .. The start-time equals to the node
uptime reported in Timeticks (nd:hh:mm:ss:ts) and value/6000 gives the
uptime in minutes. The connection-id equals {tunnel-id * 65536} and the
tunnel-id maps to L2TP AVP 9 Assigned Tunnel Id.
Reports the elapsed time in seconds over the course of this service (L2TP
session or L2TP tunnel) being provided.
Tunnel-link and Tunnel level accounting uses the ESM accounting statistics.
For Tunnel Link Stop it reports the input packets for this user over the course
of this service being provided. For Tunnel Stop this attribute represent an
aggregate of input packets of all sessions that belong/belonged to this tunnel
over the course of this service being provided.
Tunnel-link and Tunnel level accounting uses the ESM accounting statistics.
For Tunnel Link Stop it reports the output packets for this user over the course
of this service being provided. For Tunnel Stop this attribute represent an
aggregate of output packets of all sessions that belong/belonged to this tunnel
over the course of this service being provided.
indicates how the L2TP session or L2TP tunnel was terminated
RADIUS Attributes Reference
Description
Page 205