Alcatel-Lucent 7750 Reference Manual page 75

Table 11: Business Access (description) (Continued)
Attribute ID Attribute Name
26-6527-55 Alc-BGP-Policy
26-6527-56 Alc-BGP-Auth-
Keychain
26-6527-57 Alc-BGP-Auth-Key
26-6527-58 Alc-BGP-Export-
Policy
26-6527-59 Alc-BGP-Import-
Policy
26-6527-60 Alc-BGP-PeerAS
7750 SR RADIUS Attributes Reference Guide
Refers to a pre-configured policy under configure subscriber-mgmt bgp-
peering-policy <policy-name>. Mandatory attribute for dynamic BGPv4
peering. The referenced policy contains all required parameters to setup the
dynamic BGPv4 peer. Peer-AS, MD5 key, Authentication-Keychain and
import/export policies can be overridden by optional RADIUS attributes.
Dynamic BGPv4 peering related attributes are ignored if the session or host
does not terminate in a VPRN. Host setup is successful, but without BGPv4
peering if a non existing policy-name is received or if the SAP anti-spoof type
is different from nh-mac. Policy names above the maximum length result in a
host setup failure.
Optional attribute for dynamic BGPv4 peering. Refers to the keychain
parameters (configure system security keychain <keychain-name>) used to
sign and/or authenticate the BGP protocol stream via the TCP enhanced
authentication option (draft-bonica-tcp-auth). Host setup is successful but
without BGPv4 peering if a non existing keychain name is received. Keychain
names above the maximum length result in a host setup failure. Alternative for
[26-6527-57] Alc-BGP-Auth-Key.
Optional attribute for dynamic BGPv4 peering. Indicates the authentication
key used between BGPv4 peers before establishing sessions. Authentication is
done using the MD5 message based digest protocol. Authentication keys are
truncated at 247 Bytes and are not encrypted.
Optional attribute for dynamic BGPv4 peering. Refers to a pre-configured
BGP export policy (configure router policy-options policy-statement
<name>). The RADIUS received policy is appended to the peer (if pre-
configured policies for peer are smaller than 15) or replaces the fifteenth
policy (if pre-configured policies for peer are exact 15). Host setup is
successful but without export policy applied if a non existing policy-name is
received. Policy names above the maximum length result in a host setup
failure.
Optional attribute for dynamic BGPv4 peering. Refers to a pre-configured
BGP import policy (configure router policy-options policy-statement
<name>). The RADIUS received policy is appended to the peer (if pre-
configured policies for peer are smaller than 15) or replaces the fifteenth
policy (if pre-configured policies for peer are exact 15). Host setup is
successful but without import policy applied if a non existing policy-name is
received. Policy names above the maximum length result in a host setup
failure.
Optional attribute for dynamic BGPv4 peering. Specifies the Autonomous
System number for the remote BGPv4 peer.
RADIUS Attributes Reference
Description
Page 75