Alcatel-Lucent 7750 Reference Manual page 46

Subscriber Host Identification
Table 3: Subscriber Host Identification (limits) (Continued)
Attribute Attribute
ID Name
26-4874- ERX-Ipv6-
48 Secondary-
Dns
26-6527-9 Alc-Primary-
Dns
26-6527- Alc-
10 Secondary-
Dns
26-6527- Alc-Subsc-ID-
11 Str
26-6527- Alc-Subsc-
12 Prof-Str
26-6527- Alc-SLA-
13 Prof-Str
26-6527- Alc-ANCP-Str
16
26-6527- Alc-Default-
18 Router
26-6527- Alc-Client-
27 Hardware-
Addr
26-6527- Alc-Int-Dest-
28 Id-Str
26-6527- Alc-Primary-
29 Nbns
26-6527- Alc-
30 Secondary-
Nbns
26-6527- Alc-PPPoE-
34 PADO-Delay
Page 46
Type Limits
ipv6addr 16 Bytes
ipaddr 4 Bytes
ipaddr 4 Bytes
string 32 chars
string 16 chars
string 16 chars
string 63 chars
ipaddr 4 Bytes
string 6 Bytes
string 32 chars
ipaddr 4 Bytes
ipaddr 4 Bytes
integer [0..30] deci-
seconds
7750 SR RADIUS Attributes Reference Guide
SR OS Format
For example: ERX-Ipv6-Secondary-Dns =
4000::1:1:1:2
For example: Alc-Primary-Dns = 9.1.1.1
For example: Alc-Secondary-Dns = 9.1.1.2
For example: Alc-Subsc-ID-Str = MySubscriberId
For example: Alc-Subsc-Prof-Str = MySubProfile
For example: Alc-SLA-Prof-Str = MySlaProfile
format see also RFC4679
# ATM/DSL <Access-Node-Identifier><atm slot/
port:vpi.vci>
# Ethernet/DSL <Access-Node-Identifier><eth slot/
port[:vlan-id]>
For example: If [26-3561-1] Agent-Circuit-Id = dslam1
eth 2/1:100 then put Alc-ANCP-Str = dslam1 eth 2/
1:100
For example: Alc-Default-Router = 185.2.255.254
For example: Alc-Client-Hardware-Addr =
00:00:00:00:00:01
For example: Alc-Int-Dest-Id-Str= AccessNode1
For example: Alc-Primary-Nbns = 9.1.1.1
For example: Alc-Secondary-Nbns = 9.1.1.2
For example: 3 seconds pado-delay
Alc-PPPoE-PADO-Delay = 30