Wlan Gateway; Table 28: Wlan Gateway (Description) - Alcatel-Lucent 7750 Reference Manual

WLAN Gateway

In this section, WLAN gateway application specific attributes are detailed, including generic
Enhanced Subscriber Management (ESM) attributes that have different semantics when used in
WLAN gateway scenarios.

Table 28: WLAN Gateway (description)

Attribute ID Attribute Name
4 NAS-IP-Address
30 Called-Station-Id
31 Calling-Station-Id
7750 SR RADIUS Attributes Reference Guide
The identifying IP Address of the NAS requesting Authentication or
Accounting. Authentication generated from ISA (for a UE in migrant state)
can be configured to use local IP address of RADIUS client on the ISA or the
system IP address (on CPM).
config aaa isa-radius-policy name nas-ip-address-origin {isa-ip | system-
ip}
When an ESM host exists for the UE (UE is in authenticated state), then the
NAS IP in authentication and accounting is the system IP address.
If configured for inclusion in authentication and accounting policy, the called-
station-id received from EAP authentication request is transparently
forwarded in access-request. If it is contained in the accounting messages
received from the APs, it is transparently forwarded in the accounting
messages sent from the WLAN-GW. For open SSIDs, called-station-id is not
included in authentication or accounting.
Typically the string contains "<AP MAC> : <SSID-name>".
Calling-station-id contains the MAC address of the UE, if it is configured for
inclusion in isa-radius-policy for authentication generated from the ISA (for a
UE in migrant state), or in authentication and accounting policy for messages
generated from the CPM. For CPM generated authentication or accounting,
the inclusion of calling-station-id MUST explicitly specify the format of the
calling-station-id as MAC: configure subscriber-mgmt authentication-
policy | radius-accounting-policy name include-radius-attribute calling-
station-id mac.
RADIUS Attributes Reference
Description
Page 101