Alcatel-Lucent 7750 Reference Manual page 221

Table 68: Dynamic Data Service Accounting (description) (Continued)
Attribute ID Attribute Name
49 Acct-Terminate-Cause
50 Acct-Multi-Session-Id
55 Event-Timestamp
87 NAS-Port-Id
95 NAS-IPv6-Address
26-3561-1 Agent-Circuit-Id
26-3561-2 Agent-Remote-Id
26-6527-165 Alc-Dyn-Serv-Script-
Params
7750 SR RADIUS Attributes Reference Guide
Indicates how the accounting session was terminated
Accounting session id from the associated Control Channel (session acct-
session-id for PPPoE or IPoE sessions and host acct-session-id for IPoE hosts)
Record the time that this event occurred on the NAS, in seconds since January
1, 1970 00:00 UTC
The Dynamic Data Service SAP where this accounting session is started for
The identifying IP Address of the NAS requesting the Authentication or
Accounting. Included when the RADIUS server is reachable via IPv6.
The address is determined by the routing instance through which the RADIUS
server can be reached:
"Management" — The active ipv6 address in the Boot Options File (bof
address <ipv6-address>)
"Base" or "VPRN"— The ipv6 address of the system interface (configure
router interface system ipv6 address <ipv6-address>).
The address can be overwritten with the configured ipv6-source-address
(configure aaa radius-server-policy <policy-name> servers ipv6-source-
address <ipv6-address> )
The Agent-Circuit-Id attribute from the Dynamic Data Service Control
Channel associated with this Dynamic Data Service SAP accounting session
The Agent-Remote-Id attribute from the Dynamic Data Service Control
Channel associated with this Dynamic Data Service SAP accounting session
Parameters as input to the Dynamic Data Service Python script. The
parameters can cross an attribute boundary. The concatenation of all Alc-Dyn-
Serv-Script-Params attributes with the same tag in a single message must be
formatted as function-key <dictionary> where function-key specifies which
Python functions will be called and <dictionary> contains the actual
parameters in a Python dictionary structure format.
In dynamic service RADIUS accounting messages, the attribute is sent
untagged and contains the last received Alc-Dyn-Serv-Script-Params value in
an Access-Accept or CoA message for this dynamic service. Multiple
attributes may be present if the total length does not fit a single attribute.
RADIUS Attributes Reference
Description
Page 221